Solid, Heavy and Minimal
The RJ630 Ring Pull is a beautiful addition to any project. This pull can scale from cabinet doors up to full size doors. Back to Back option available, scroll down for more information or call to discuss.
Available in all RAJACK FINISHES or matching your existing sample finishes.
If you have a design idea you would like to discuss about this product or any of our other products, please call and/or email.
Please call 631-293-8273 or email for pricing, lead time or any additional information.
CALL OUT DATA
Call Out / PO Order Detail
RJ630 Ring Pull: 3" OA Dia
US15 Satin Nickel
Quick Facts about this product:
3-00" OA Dia Front Face / Bore 2-3/4" dia
2-1/2" OA Dia Front Face / Bore 2-1/8" dia
Manufactured for Cabinet Doors,
Drawers and Door Pulls
No minimum quantities.
Available in all finishes
RJ630 Standard Install
Although the install for the RJ630 is pretty straight forward. We recognize it is a little unconventional so we put together a few quick steps to help with your install. Please feel free to give us a call if you need additional assitance. It will be helpful to have this page open when you call.
RAJACK RJ630 3.1On the back side of the pull remove the upper ring hold screws. Remove the upper ring from the pull.
RAJACK RJ630 3.2On the face of the pull you will see the two upper ring screw holes and the two machine screw holes.
RAJACK RJ630 3.3Your machine screw holes can be used to mark your drill location when pull is set in mortise bore.
RJ630 Back to Back - Option #1
This BACK to BACK option is for doors 1-3/8" thick or greater. Support arms run through the thickness of your door from one pull and directly connect to the pull on the opposite side of the door. Keep in mind one pull will have exposed screws on the face of the pull. The exposed screws will be finished, flush and neat. For doors thinner then 1-3/8" scroll down further.
RAJACK RJ630 4.1Two support legs are brazed onto back of one of the two pulls. Both legs are threaded to receive screws.
RAJACK RJ630 4.3Front of pull will have no screws exposed and back of pull shows two exposed screws.
RJ630 Back to Back - Option #2
This BACK to BACK option is for doors 1" thick to 1-3/4" thick. Front face mounted #2 screws are neatly tucked under the drop ring of the pull (see 5.1). When the drop ring is in the down position the screws are not seen see (5.2). The provided #2 x 1/2"L screws provided will need 3/8"L space to screw in (see 5.3). IMPORTANT NOTE: depending on the thickness of the door you may have to stagger the pull location on one side of the door (see).